Safe Operation Rules For Spraying Shop

1. The operator of this machine must be trained in safety technology, be familiar with and master the performance, structure and technical specifications of this machine, read the operation manual carefully, and work after passing the examination. Otherwise, it is not allowed to operate independently without authorization, and must wear labor protection supplies.

2. Before running the machine, check the fasteners of the chain, and adjust the tensioning device of the conveyor chain. Check whether the air pressure and air volume are adequate, confirm the dry cleanliness of compressed air, and check whether the powder is adequate.

3. When the spray gun is blocked, the needle should be used to test spray at 45° Angle, not to people and themselves, to prevent high pressure gas from hurting people

4. During operation, attention should be paid to the observation that the hangers and workpieces shall not be stuck, swaying, bumping and sliding off.

5. When the operator is spraying, except for the gun arm, all parts of the human body should not enter the spraying room.

6, do not allow the existence of ignition source, open flame and spark generating equipment and appliances, no fireworks.

7, the machine failure or abnormal operation phenomenon, should immediately press the emergency stop switch to stop, notify the relevant departments to repair. After each adjustment of each link of the machine, it is necessary to check the coordination of each moving mechanism by point movement, and only after confirming that there is no problem can it be transferred to automatic operation.

8. During equipment maintenance and maintenance, the power supply and air source must be turned off first, and the equipment can be completely stopped before it is carried out.

9. The air source and power supply should be turned off after the work is finished. After each shift work, must clean the work site, lubrication maintenance wipe machine tools.