Operation Precautions Of Putty Spraying Machine

1. When the putty sprayer stops working in a short time, a small amount of air pressure should be applied to prevent sand from entering the impactor. If you stop working for a long time, you should lift the impactor from the bottom of the hole and fix it on the meter.

2. Check the lubrication of the wind motor of the waterproof coating sprayer at any time.

3. At the end of each work shift of the putty sprayer, the dirt on its surface must be removed. It is strictly forbidden to disassemble and unload on the working surface (except when disassembled into parts for convenient operation), so as to avoid losing parts and damaging key parts of parts. The drill pipe joints are lubricated with butter, and the reducer is lubricated with butter.

4. When the waterproof paint sprayer is working, pay attention to whether the sound of the impactor and the operation of the gearbox are normal. If any abnormality is found, it should be closed and checked immediately. Special attention should be paid to cleaning to prevent sand and soil from entering the impactor, damaging parts or stopping operation.

5. Check whether the connections of gas and tap water pipes, bolts and nut joints are firm and reliable at any time. Putty spraying machine is also very common in life, it is very necessary to understand some preventive measures in the work process, especially for operators, this is especially important.